CSHL Long RNA-seq Track Settings
 
ENCODE Cold Spring Harbor Labs Long RNA-seq   (All Expression tracks)

Maximum display mode:       Reset to defaults   
Select views (Help):
Plus Raw Signal ▾       Minus Raw Signal ▾       All Raw Signal ▾       Alignments      
Select subtracks by cell line and localization:

  Rna Extract: Total RNA Long PolyA+
 All Cell Line GM12878 (Tier 1)  K562 (Tier 1) 
Localization
Cell 
Cytosol 
List subtracks: only selected/visible    all    ()
  Cell Line↓1 Localization↓2 Rna Extract↓3 views↓4   Track Name↓5    Restricted Until↓6
 
hide
 Configure
 GM12878  Cell  Total RNA  Plus Raw Signal  ENCODE CSHL Long RNA-seq Plus Strand Raw Signal Rep 1 (GM12878 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 GM12878  Cell  Total RNA  Plus Raw Signal  ENCODE CSHL Long RNA-seq Plus Strand Raw Signal Rep 2 (GM12878 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 GM12878  Cell  Total RNA  Minus Raw Signal  ENCODE CSHL Long RNA-seq Minus Strand Raw Signal Rep 1 (GM12878 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 GM12878  Cell  Total RNA  Minus Raw Signal  ENCODE CSHL Long RNA-seq Minus Strand Raw Signal Rep 2 (GM12878 whole cell)    Data format   2010-07-22 
 
hide
 GM12878  Cell  Total RNA  Alignments  ENCODE CSHL Long RNA-seq Tags Replicate 1 (GM12878 whole cell)    Data format   2010-07-22 
 
hide
 GM12878  Cell  Total RNA  Alignments  ENCODE CSHL Long RNA-seq Tags Replicate 2 (GM12878 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 GM12878  Cell  Total RNA  All Raw Signal  ENCODE CSHL Long RNA-seq All Alignments Raw Signal Rep 1 (GM12878 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 GM12878  Cell  Total RNA  All Raw Signal  ENCODE CSHL Long RNA-seq All Alignments Raw Signal Rep 2 (GM12878 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 K562  Cell  Total RNA  Plus Raw Signal  ENCODE CSHL Long RNA-seq Plus Strand Raw Signal Rep 1 (K562 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 K562  Cell  Total RNA  Plus Raw Signal  ENCODE CSHL Long RNA-seq Plus Strand Raw Signal Rep 2 (K562 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 K562  Cell  Total RNA  Minus Raw Signal  ENCODE CSHL Long RNA-seq Minus Strand Raw Signal Rep 1 (K562 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 K562  Cell  Total RNA  Minus Raw Signal  ENCODE CSHL Long RNA-seq Minus Strand Raw Signal Rep 2 (K562 whole cell)    Data format   2010-07-22 
 
hide
 K562  Cell  Total RNA  Alignments  ENCODE CSHL Long RNA-seq Tags Replicate 1 (K562 whole cell)    Data format   2010-07-22 
 
hide
 K562  Cell  Total RNA  Alignments  ENCODE CSHL Long RNA-seq Tags Replicate 2 (K562 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 K562  Cell  Total RNA  All Raw Signal  ENCODE CSHL Long RNA-seq All Alignments Raw Signal Rep 1 (K562 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 K562  Cell  Total RNA  All Raw Signal  ENCODE CSHL Long RNA-seq All Alignments Raw Signal Rep 2 (K562 whole cell)    Data format   2010-07-22 
 
hide
 Configure
 K562  Cytosol  Long PolyA+  Plus Raw Signal  ENCODE CSHL Long RNA-seq Plus Strand Raw Signal Rep 1 (PolyA+ in K562 cytosol)    Data format   2010-04-06 
 
hide
 Configure
 K562  Cytosol  Long PolyA+  Minus Raw Signal  ENCODE CSHL Long RNA-seq Minus Strand Raw Signal Rep 1 (PolyA+ in K562 cytosol)    Data format   2010-04-06 
 
hide
 K562  Cytosol  Long PolyA+  Alignments  ENCODE CSHL Long RNA-seq Tags Replicate 1 (PolyA+ in K562 cytosol)    Data format   2010-04-06 
 
hide
 Configure
 K562  Cytosol  Long PolyA+  All Raw Signal  ENCODE CSHL Long RNA-seq All Alignments Raw Signal Rep 1 (PolyA+ in K562 cytosol)    Data format   2010-04-06 
     Restriction Policy
Assembly: Human Mar. 2006 (NCBI36/hg18)

Description

This track depicts high throughput sequencing of long RNAs (>200 nt) from RNA samples from tissues or subcellular compartments from ENCODE cell lines. The overall goal of the ENCODE project is to identify and characterize all functional elements in the sequence of the human genome.

Display Conventions and Configuration

This track is a multi-view composite track that contains the following views:
Alignments
The Alignments view shows reads mapped to the genome. Sequences determined to be transcribed on the positive strand are shown in blue. Sequences determined to be transcribed on the negative strand are shown in orange. Sequences for which the direction of transcription was not able to be determined are shown in black.
Raw Signals
The Raw Signal views show the density of aligned tags on the plus, minus, and on both strands.

Methods

Cells were grown according to the approved ENCODE cell culture protocols.

Sample preparation and sequencing

K562 and GM12878 total cell, total RNA

Standard Illumina Pair-end kit with the sole exception that a "tagged" random hexamer was used to prime the 1st strand synthesis: 5′ACTGTAGGN6-3′. The addition of this tag is what permits us to make strand assignments for the reads. The sequence of the tag is reported in the 5′ end of the read. Asymmetric PCR can place the tag on either the 1st or 2nd read depending on which strand it used as a template. Strand assignments are made by looking for the tag at the 5′ end of either read 1 or read 2. Read 1 is physically linked to read 2. Therefore, if a tag is present on one end strand assignments are made for both ends. We noted during analysis that the tags are generally 5′ truncated. We only "strand" reads that contain ACTGTAGG, CTGTAGG, TGTAGG, GTAGG. Between 63-68% of reads could be stranded in these libraries. It is possible to cull additional stranded reads that contain non-templated TAGG, AGG, GG, or G sequences at their 5′ end. The peak in insert size distribution is between 200-250 nucleotides.

K562 cytosol, polyA+ RNA

Oligo-dT selected poly-A+ RNA was RiboMinus-treated according to the manufacturer's protocol (Invitrogen). The RNA was treated with tobacco alkaline pyrophosphatase to eliminate any 5′ cap structures and hydrolyzed to ~200 bases via alkaline hydrolysis. The 3′ end was repaired using calf intestinal alkaline phosphatase, and poly-A polymerase was used to catalyze the addition of Cs to the 3′ end. The 5′ end was phosphorylated using T4 PNK, and an RNA linker was ligated onto the 5′ end. Reverse transcription was carried out using a poly-G oligo with a defined 5′ extension. The inserts were then amplified using oligos targeting the 5′ linker and poly-G extension. This cloning protocol generated stranded reads that were read from the 5′ ends of the inserts. The library was sequenced on a Solexa platform for a total of 36 cycles; however, the reads underwent post-processing, resulting in trimming of their 3′ ends. Consequently, the mapped read lengths are variable.

Analysis

K562 and GM12878 total cell, total RNA

Tags were removed from the 5′ ends of the reads in accordance to their lengths and strand assignments made. Subsequently, the reads were trimmed from their 3′ ends to a final length of 50 nucleotides and were mapped using NexAlign, a program developed by Timo Lassman, RIKEN. We allowed up to 2 mismatches across the entire length and only report reads that mapped to a single/unique locus in the assembled hg18 genome.

K562 cytosol, polyA+ RNA

Reads were mapped to the human (hg18, March 2006) assembly using Nexalign, with only uniquely mapping (one loci), exactly matching (no mis-matches) aligned reads reported in the processed files, as follows:

  1. Collect the read sequences from Illumina non-filtered output files.
  2. Filter out all reads that contain undefined nucleotides ('N')
  3. Perform iterative alignment/C-tail chopping algorithm (below). On each alignment step, the reads are aligned to the genome with 100% identity. All reads that align to a single locus are withdrawn from the alignment pool and only the reads that could not be aligned continue to the next step.
    1. Align to the hg18 genome using Nexalign 1.3.3 (© Timo Lassmann) without chopping off any nucleotides
    2. Chop off any C-blocks (until the first non-C) at the ends of the reads
    3. Align to the genome -> remove and save those that align
    4. Chop off any non-Cs until the next C
    5. Chop off C-block until the next non-C
    6. Align to the genome -> remove and save those that align
    7. Repeat steps d, e, and f until the reads align to the genome, or chopping results in the reduction of the reads' lengths to below 16 (default), or there are no non-Cs left.

Verification

Verification was done by comparison of referential data generated from 8 individual sequencing lanes (Illumina technology).

Release Notes

This is Release 2 (Nov 2009) of this track. It includes data from additional experiments, and changes in formatting for the existing data described below.

The K562 cytosol alignments are exactly the same data as Release 1, but the alignments are now formatted in the bed14 format described below. These data have the string submittedDataVersion="V2 - file format change" in their metadata and the table names are appended with the string "V2".

The data format for the alignments in this track are provided in bigBed format. Each record is in bed 14 format with the first 12 fields described here. The final two fields are the two paired sequences, or in the case of single alignments, the 13th field is the sequence and the 14th field is a single N.

Credits

K562 cytosol, polyA+ RNA

These data were generated and analyzed by the transcriptome group at Cold Spring Harbor Laboratories, and the Center for Genomic Regulation (Barcelona), who are participants in the ENCODE Transcriptome Group.

K562 and GM12878 total cell, total RNA

Credits: Carrie A. Davis, Jorg Drenkow, Huaien Wang, Alex Dobin and Tom Gingeras

Contacts: Carrie Davis and Tom Gingeras (CSHL).

Data Release Policy

Data users may freely use ENCODE data, but may not, without prior consent, submit publications that use an unpublished ENCODE dataset until nine months following the release of the dataset. This date is listed in the Restricted Until column, above. The full data release policy for ENCODE is available here.